Live Chat
 


Radian Research Logo

ANSI Products
IEC Products
Radian Accessories
Customer Services
Customer Hub



 


 
RW-3x Product Page Arrow

 
dots

Accessories


Basic Cable Set

(BW0157XX) RW-30 / RW-31 Portable Three-Phase Meter Site Source Analyzer Basic Cable Set ---- The RW-3X ships with this Basic Cable Set which includes the following:


Please note: the last two digits of the part number indicate the revision – example: BW015701. For the purpose of this document the current revision is represented by XX – example: BW0157XX.


BW0115

(BW0115XX) RW-3X Analog Sense Cable ---- The Analog Sense Cable easily clips to the output terminal of a transducer permitting accuracy testing for a wide variety of transducers.

BW0148

(BW0148XX) RW-3X Potential Cable Assembly Set, 2mm Right Angle Plugs ---- Connect your RW-3X into the meter test switch and take control of the amount of potential applied to the meter. Our standard potential leads are 8 ft long with alligator clips which are designed for safety and durability. 1000V, 550mA inline fuses provide over-current protection for the RW-3X voltage channels.

CF000076

(CF000076) Fuse 6.3 x 32, 500mA 1KV, Very Fast Acting ---- Replacement fuses for BW0148XX. 3 spare fuses are included with the basic cable set.

(BW0149XX) RW-3X Braided ‘A’, ‘B’, ‘C’ Phase Current Cable Set with Saf-T-Plugs ---- The current cable set with Saf-T-Plugs connects the RW-3X to the test switch allowing you to read the secondary current of the transformer as well as burden test the current circuit. This is a braided, 3 color-coded (red, yellow, blue) 8 ft cable.

(BW0096XX) RW-3X Bypass Current Cable Set for Use with Saf-T-Plugs ---- This cable set is used with the Phase Current Cable (BW0149XX) to jumper around the test switch and inject current into the meter.

(BW0150XX) RW-3X Braided ‘A’, ‘B’, ‘C’ Phase Current Cables with Alligator Clips ---- The current cable set with alligator clips allows you to connect the RW-3X to the current tabs of on a meter test switch. Once connected the RW-3X can control the current applied to any transformer rated meter. This is a braided, 3 color-coded (red, yellow, blue) 8 ft cable.

(BW0151XX) RW-3X Field Power Cable ---- Each RW-3X shipment includes a field power cord with alligator clips that connect to the bottom of the test switch, providing a convenient and safe way to power the unit at the site.

CE000040) CAT5e RJ45M to RJ-45M Cross-Over Cable, 10 ft, Orange ---- With the supplied Ethernet crossover cable, it is a cinch to directly connect the RW-3X to an external laptop for control of the unit without having to connect it to a network.

(CE110021) Shop Power Cord, 9 ft 10 in ---- Back at the shop, the AC shop power cord provides a convenient way to power the RW-3X from a standard 120VAC power outlet.

(CH001003) Test Switch Current Isolator ---- Don’t waste time hunting around the shop for something to use to isolate currents in the test switch. The RW-3X ships with a set of six current isolators that are portable, durable, and provide great current isolation between test switches.

(CM000080) Nylon Portfolio Bag ---- The RW-3X’s nylon portfolio bag gives meter testers the ability to grab-and-go. With ample storage room for all of the cables and leads that come standard with the RW-3X, this bag is both convenient and portable.




Alternate Basic Cable Set

BW0193XX) RW-30 / RW-31 Portable Three-Phase Meter Site Source Analyzer Alternate Basic Cable Set, 8mm / 4mm pins, South America ---- The RW-3X ships with this Alternate Basic Cable Set which includes the following:


BW0115

(BW0115XX) RW-3X Analog Sense Cable ---- The Analog Sense Cable easily clips to the output terminal of a transducer permitting accuracy testing for a wide variety of transducers.

(BW0191XX) RW-3X Potential Cable Assembly Set, 2mm, Right Angle Plugs ---- Our standard potential leads are 8´ long and are terminated with 4mm pins. 1000V, 550mA inline fuses provide over-current protection for the RW-3X voltage channels.

CF000076

(CF000076) Fuse 6.3 x 32, 500mA 1KV, Very Fast Acting ---- Replacement fuses for BW0191XX. 3 spare fuses are included with the basic cable set.

(BW0192XX) RW-3X Braided Current Cables terminated with 8mm Pins ---- This provides the current connections to the meter under test.

(BW0190XX) RW-3X Field Power Cable terminated with 4mm Pins ---- A convenient way to power the unit at the site.

(CE000040) CAT5e RJ45M to RJ-45M Cross-Over Cable, 10 ft (3 meters), Orange ---- With the supplied Ethernet crossover cable, it is a cinch to directly connect the RW-3X to an external laptop for control of the unit without having to connect it to a network.

(CE110021) Shop Power Cord, 9’ 10” ---- Back at the shop, the AC shop power cord provides a convenient way to power the RW-3X from a standard 120VAC power outlet.

(CM000080) Nylon Portfolio Bag ---- The RW-3X’s nylon portfolio bag gives meter testers the ability to grab-and-go. With ample storage room for all of the cables and leads that come standard with the RW-3X, this bag is both convenient and portable.



Optional Accessories


Optic Options:


(AW0005XX) RW-3X OPTOCOM™ Optics Kit ---- Increase the versatility of your field testing with WECO’s OPTOCOM™ option. Attach the optic coupler head to properly equipped solid state meter and forget about alignment. When the test is complete, you can program the meter right at the site without having to change out optic heads. Connects to Optics Port 1.

(AW0017XX) RW-3X Reflect and Solid State Optics with Meter Band Clamp ---- This optics solution combines both reflect optics for mechanical meters and pulse detecting optics for solid state meters in one convenient package. Lock down optics arm, easy mode selection, LED indicators, and a secure grip band clamp make this a valuable addition to any field test kit. Connects to Optics Port 2.

(AW0040XX) RW-3X Magnetic Mount Optics, Visible, IR and Mechanical Meter Disk Sensor ---- This option combines both reflect optics for mechanical meters and pulse detecting optics for solid state meters into one handy tool. Attach this optics solution with the flip of a switch to any can-mounted meter. The LED indicators and mode selection make testing a snap. Connects to Optics Port 2.

(AC0015XX) Magnetic Mount Optics Kit, IR and Mechanical Meter Disk Sensor ---- This has been a workhorse for many years, however operation in direct sunlight is a challenge. The AW0017XX and AW0040XX have been developed to address this issue and will perform in direct sunlight. Connects to Optics Port 2.

(AW0006XX) RW-3X Solid State Optics Probe Assembly, Suction Cup, IR Detector ---- When you are faced with a meter enclosure that does not accommodate magnetic or clamp based optics use WECO’s Solid State IR Optics Probe Assembly with suction cup attachment to detect the meter’s IR emitter. Connects to Optics Port 2.

(AW0007XX) RW-3X Solid State Optics Probe Assembly, Suction Cup, Visible Detector ---- Don’t let enclosures that prevent magnetic or clamp based optics attachments keep you from getting quick test results. WECO offers the Visible Solid State Optics with Suction Cup attachment to make sure you can test meters equipped with visible LEDs. Connects to Optics Port 2.

(AW0008XX) RW-3X Click Switch Adapter ---- Sometimes optics just are not an option, and that’s when you turn to WECO’s Click Switch Adapter. Visually observe the disk’s rotation and manually register revolutions with the click of a button. Connects to Optics Port 3.

(AW0020XX) RW-3X Power Cable for Radian RM-DS Meter Disk Sensor ---- This adapter cable plugs into the RW-3X Optics Port 2 to power Radian’s RM-DS meter disk sensor. This cable plugs into Optics Port 2. The RM-DS connects to Optics Port 3.

(AW0033XX) RW-3X Optics Extension Cable, 33 ft (10 meters) ---- When your standard optics cable just isn’t long enough, reach for WECO’s Optics Extension Cable. This cable adds 33 ft (10 meters) to the allowable distance between your optics sensor for the Optics 2 Input and RW-3X. This cable is used with any of the optics that connect to Optics Port 2.



External Current Probe Options:

(AW0027XX) RW-3X 20 amp .47”[12mm] Jaw Transformer Rated Probe Kit, 5 ft + 25 ft Leads ---- This small, compact probe with a .47” jaw opening is used to measure currents from 40mA to 10A, 600 V maximum.

(AW0013XX) RW-3X Current Probe, 100 amp .47”[12mm] Jaw Transformer Rated Probe Kit, 5 ft Leads + 25 ft Extension ---- The “clothespin” style current probe is most often used for secondary current measurements from 400mA to 100A, 600V maximum.

(AW0014XX) RW-3X 1000 amp, 2.25” Clamp On Probe Kit, 25 ft Leads, 600 Volts ---- The circular clamp-on probe is used for current measurements with a range of 2.0A to 1000A, 600 V maximum for conductors up to 2.25” maximum.

(AW0028XX) RW-3X 3000 Amp Square Jaw Probe Kit, 25 ft Leads, 600 Volts ---- This square clamp is great for higher currents, up to 3000A. The square jaw permits multiple conductors or bus bar positioning.


(AW0010XX) RW-3X AmpFlex® Current Probe Kit , 100/1000 Amps, 1000 Volts, 36 in, 25 Ft Current Probe Extension Cable (AW0018XX) ---- The AmpFlex® current probe kit includes a flexible current sensor for measurements on conductors where standard clamp-on probes cannot be used. The 36 inch sensor with electronic module and a calibration adapter can measure up to 1000 amps, 1000 V maximum.


(AW0052XX - 24 in), (AW0026XX - 36 in) RW-3X AmpFlex® Current Probe Kit, 3000 Amps, 1000 Volts, 25 Ft Current Probe Extension Cable (AW0018XX) ---- The AmpFlex® current probe kit includes a flexible current sensor for measurements on conductors where standard clamp-on probes cannot be used. The sensor with electronic module and a calibration adapter can measure up to 3000 amps, 1000 V maximum.


(AW0011XX) RW-3X High Voltage Current Probe Kit, 2000 Amps, 150kV ---- The high voltage current probe kit includes a fiber optic isolated current probe with 3.85˝ wide jaw for current measurements of primary conductors above 600V to 150kV. Use to test CT Ratios. Detachable line hanger, adapter and probe with hot stick mounting capability all come in a convenient carrying case.

(AW0059XX) RW-3X CT Current Boost, 200 Amps, ---- Use this CT Current Boost module at sites where current is low. For use with through-hole CTs only.



External Voltage Probe Options:

(AW0023XX) RW-3X 600V Voltage Probe Kit for Low Voltage PT Testing ---- The 600V PT Probe allows you to check the voltage on systems that are 600 volts and less, allowing you to verify the potential transformer is working correctly.

(AW0012XX) RW-3X High Voltage Probe Kit, 40kV ---- This high potential kit is a power quality tool for 10kV to 40kV applications. Determine primary voltage from primary conductors. Use to test PT Ratios. A fiber optic link provides the isolation. Kit comes complete with carrying case, hot stick mounting capability, and adapters.



Probe Options: (Extensions and Adapters)

(AW0018XX) RW-3X Current Probe Extension Cable, 25 ft ---- Extend the distance from the RW-3X to the test location by 25 ft with this cable. Connect up to four to increase the overall distance to 100 ft. This option works with all probes listed above.

(AW0019XX) RW-3X Adapter Kit for Customer Supplied Sensor Link Probe ---- For customers who already own compatible sensor link voltage or current probes, this low cost adapter kit makes it possible to use with your RW-3X. Note: for reliable accuracies, send your probe to WECO for calibration.



KYZ Cable Options:

KYZ Cables:
(AW0009XX) RW-3X Form-C KYZ Cable Set, 6.5 ft (3 wire front panel jacks) ---- All you need is a KYZ cable set to conduct a KYZ test or use the KYZ connection to test the meter. Three plugs connect right to the RW-3X front panel jacks by standard yellow, black, and red cables with alligator clips to the meter.


Advanced I/O KYZ Breakout Cables:
(AW0022XX - 8 ft),(AW0025XX - 12 ft), (AA0029XX - 18 in) RW-3X Advanced I/O KYZ Breakout Cable ---- This cable is used to connect KYZ outputs from meters into the RW-3X’s Advanced I/O Connector. The connector has two Form A input channels that can be independently configured as four Form C input channels. The Advanced I/O Connector also has two Form A output channels and one Form C output channel.



Additional Current and Voltage Lead Options:



(AW0046XX) RW-3X Voltage and Current Cable Alternate Termination Assembly Set, Right Angle, Customer End Unterminated ---- This set includes a RW-3X Potential Cable with right angle, customer unterminated ends and a RW-3X ‘A’, ‘B’, ‘C’ Phase Current Cable with right angle plugs, customer unterminated ends.


(AW0048XX) RW-3X Voltage and Current Cable Set, Switchboard Meters, 4mm Plugs for Test Paddle Terminations.



(AW0049XX) RW-3X Voltage and Current Leads Extension Kit, 12 ft ---- This extension kit increases the distance from the RW-3X to your test switch by 12 ft. It supports up to 600V and 15A per phase. This also includes a 12 ft optics and optics coupler extension.

(AW0050XX) RW-3X Braided ‘A’, ‘B’, ‘C’ Phase Current Cables with Open CT Saf-T-Plugs, Right Angle Plugs ---- Right Angle Plugs are highly recommended. The special Saf-T-Plugs have a protection circuit at the test switch connection which will short the CT if an open circuit condition is detected.



Standards Compare Kits:

Use an external standard and a WECO Standards Compare Kit you can make sure your RW-3X’s internal standard is delivering the high accuracy results you need. All of the necessary cables are included, and the RW-3X’s on-board software provides simple to use test step entry to make the standards compare test a snap.




(AL0032XX) RW-3X Standards Compare Kit for an External RD-2x or RD-3x Standard.


(AL0033XX) RW-3X Standards Compare Kit for an External RM Standard.


(AW0047XX) RW-3X Cable Set for RM/RD/uJoule Interchange Standard ---- This cable set allows for an external Radian standard or uJoule to be put in series with the RW-3X during a meter test for tie line testing.



Miscellaneous Options:

(AX0023XX) RW-3X, Barcode Scanner Option ---- The RW-3X’s onboard software has been built from the ground up to take full advantage of barcode scanning to save you valuable time when meter testing in the field. With just one scan of a barcode you can automatically enter the meter’s faceplate information, load the appropriate test sequence, and recall the last saved results for that particular meter.

(CA000581) TTS-8 Temporary Test Switch for 5S meter ---- This allows you to remove a socket meter, plug in the adapter with the test switch and then plug the meter into the adapter for 5S meters.

(CA000579) TTS-13 Temporary Test Switch for 6S and 9S meters ---- This allows you to remove a socket meter, plug in the adapter with the test switch and then plug the meter into the adapter for 6S and 9S meters.

(AE0016XX) Model 3230 M3230 3-Phase Shop Stand Adapter for RW-3X, Integrated Smart Socket, USB Interface ---- This allows you to utilize the RW-3X’s features while on site in the van, as well as back at the shop. See the following page for additional information.


You Know It;s True When It's Blue
An Employee Owned Company
Certification and Accreditation Home Copyright Radian Research Inc 2015