Live Chat
 


Radian Research Logo

ANSI Products
IEC Products
Radian Accessories
Customer Services
Customer Hub



 



  Other Accessories
 
dots



Following are part numbers and brief descriptions of various cables and leads that are accessories to an RS Laboratory Calibration System. Many of these are included with the purchase of an RS system, others are not. The items that are typically included are listed in case replacements are needed.



193012 Current Output Cables: Set of two current output cables used for providing the test current signals from each phase of an RS Laboratory Calibration System.



193015 Voltage Output Cables: specially designed cable set that provides the test voltage signals from each phase of an RS Laboratory Calibration System. These cables contain a feedback loop that compensates for any losses due to cable lead length ensuring the most accurate voltage output signal at the point of connection to the device under test. Terminate in a spade style connector.



193036 Voltage Output to 4mm Banana: Voltage output cable set that terminates in a pair of 4mm Banana style connection. Used when testing RD standards or other devices using 4 mm style banana input connectors for voltage.



190075 Current output to 6mm adapter: Adapters to go from the current output cables of an RS Calibration system to the 6 mm style current inputs of an RD standard. Need two adapters per one set of current output cables.



193007 Current Jumper: 1.5 ft current jumper to series connect current from one RM standard to another when testing multiple RM standards at one time. Made from 4 awg wire and terminating in a .25 inch plated copper plug.



193008 Voltage Jumper: 2 ft voltage jumper pair to parallel connect voltage or auxiliary power inputs of more than one RM standard when testing multiple RM standards at one time.



191014 Fiber Optics Cable: 8 ft replacement fiber optics cable for use in communications between system computer and various modules of an RS Laboratory Calibration System.



100003 RM-1C Input Cable: 6 ft BNC-BNC cable for connection of a standard's pulse output to the input of the RS system's data collection module.



10008 RM-2C Input Cable: 9 ft BNC-BNC cable for connection of a standard's pulse output to the input of the RS system's data collection module.


dots

You Know It;s True When It's Blue
An Employee Owned Company
Certification and Accreditation Home Copyright Radian Research Inc 2015