01.
Accessories
....................................................................
ANSI and IEC Compatible
....................................................................
All RW-30 and RW-31 accessories are compatible with the RW-30/31X NS.
The Radian RW-3x Portable Three Phase Meter Site Analyzer Socket Adapters allow for safe and easy access to meter test points in the field. Simply remove the meter, install the socket adapter, and place the meter into the adapter. Minimize service outage duration and streamline the testing setup. The custom cable assembly ensures proper connection every time and minimizes the manual touch points of individual cable connections. These socket adapters supply power to the RW and ensure proper wiring configuration for the testing to be performed.
AL0065 - RW-30 Adapter, Form 16S
AL0066 - RW-30 to Socket Adapter, Cable Assembly
AL0075 - RW-30 Adapter, Form 1S/2S/12S/25S
AL0084 - RW-30 Socket Adapter Interface Kit
(BW0157) RW-30X / RW-31X Portable Three-Phase Meter Site Source Analyzer Basic Cable Set
Items (BW0193) and (BW0219) can be ordered to replace the basic (BW0157) cable set.
RW Analog Sense Cable (BW0115)
The Analog Sense Cable easily clips to the output terminal of a transducer permitting accuracy testing for a wide variety of transducers.
RW Potential Cable Assembly Set, 2mm Right Angle Plugs (BW0148)
Connect your RW-30/31X into the meter test switch and take control of the amount of potential applied to the meter. Our standard potential leads are 8 ft long with alligator clips which are designed for safety and durability. 1000V, 550mA inline fuses provide over-current protection for the RW voltage channels.
Cable (BW0216)
Cable is identical to (BW0148), alligator clips are replaced with EZ-Hook Clips.
Fuse 6.3 x 32, 500mA 1KV, Very Fast Acting (CF000076)
Replacement fuses for BW0191. 3 spare fuses are included with the basic cable set.
RW Braided ‘A’, ‘B’, ‘C’ Phase Current Cable Set with Saf-T-Plugs (BW0149)
The current cable set with Saf-T-Plugs connects the RW to the test switch allowing you to read the secondary current of the transformer as well as burden test the current circuit. This is a braided, 3 color-coded (red, yellow, blue) 8 ft cable.
RW Bypass Current Cable Set for Use with Saf-T-Plugs (BW0096)
This cable set is used with the Phase Current Cable (BW0149) to jumper around the test switch and inject current into the meter.
RW Braided ‘A’, ‘B’, ‘C’ Phase Current Cables with Alligator Clips (BW0150)
The current cable set with alligator clips allows you to connect the RW to the current tabs of on a meter test switch. Once connected the RW can control the current applied to any transformer rated meter. This is a braided, 3 color-coded (red, yellow, blue) 8 ft cable.
Cable (BW0217)
Cable is identical to (BW0150), alligator clips are replaced with EZ-Hook Clips.
RW Field Power Cable (BW0151)
Each RW shipment includes a field power cord with alligator clips that connect to the bottom of the test switch, providing a convenient and safe way to power the unit at the site.
Cable (BW0218)
Cable is identical to (BW0151), alligator clips are replaced with EZ-Hook Clips.
CAT5e RJ45M to RJ-45M Cross-Over Cable, 10 ft, Orange
(CE000040)
With the supplied Ethernet crossover cable, it is a cinch to directly connect the RW to an external laptop for control of the unit without having to connect it to a network.
Shop Power Cord, 9 ft 10 in (CE110021)
Back at the shop, the AC shop power cord provides a convenient way to power the RW from a standard 120VAC power outlet.
Test Switch Current Isolator (CH001003)
Don’t waste time hunting around the shop for something to use to isolate currents in the test switch. The RW ships with a set of six current isolators that are portable, durable, and provide great current isolation between test switches.
Partitioned Cable Carryall Bag
(CM000180)
22”W x 9”D x 10”H --- The Carryall Bag with adjustable shoulder strap gives meter testers the ability to grab-and-go. With wash clean surface and ample storage room for all cables and leads this bag is both convenient and portable.
RW Potential Cable Assembly Set, 2mm, Right Angle Plugs (BW0191)
Our standard potential leads are 8´ long and are terminated with 4mm pins. 1000V, 550mA inline fuses provide over-current protection for the RW voltage channels.
RW Braided Current Cables terminated with 8mm Pins (BW0192)
This provides the current connections to the meter under test.
RW Field Power Cable terminated with 4mm Pins (BW0190)
A convenient way to power the unit at the site.
RW-3x LCD Screen Cover (MW009401)
The Screen Cover is impact resistant transparent hinged polycarbonate. The cover in lower position is rugged and protects the LCD from scratches and impact. Lifting the cover allows complete access to the LCD.
Protective Anti-Glare Film (CD000025)
173.5mm x 130.5mm --- Precut to fit exactly the RW 8.4” LCD touch screen makes the protective film ideal for meter testers to easily install. The protective film reduces glare and can be effortlessly remove when replacement is need.
........................................................................................................................
Optic Options:
RW OPTOCOM™ Optics Kit (AW0005)
Increase the versatility of your field testing with WECO's OPTOCOM™ option. Attach the optic coupler head to properly equipped solid state meter and forget about alignment. When the test is complete, you can program the meter right at the site without having to change out optic heads. Connects to Optics Port 1.
RW Reflect and Solid State Optics with Meter Band Clamp (AW0017)
This optics solution combines both reflect optics for mechanical meters and pulse detecting optics for solid state meters in one convenient package. Lock down optics arm, easy mode selection, LED indicators, and a secure grip band clamp make this a valuable addition to any field test kit. Connects to Optics Port 2.
RW Magnetic Mount Optics, Visible, IR and Mechanical Meter Disk Sensor
(AW0040)
This option combines both reflect optics for mechanical meters and pulse detecting optics for solid state meters into one handy tool. Attach this optics solution with the flip of a switch to any can-mounted meter. The LED indicators and mode selection make testing a snap. Connects to Optics Port 2.
Magnetic Mount Optics Kit, IR and Mechanical Meter Disk Sensor
(AC0015)
This has been a workhorse for many years, however operation in direct sunlight is a challenge. The AW0017 and AW0040 have been developed to address this issue and will perform in direct sunlight. Connects to Optics Port 2.
RW Power Cable for Radian RM-DS Meter Disk Sensor (AW0020)
This adapter cable plugs into the RW Optics Port 2 to power Radian’s RM-DS meter disk sensor. This cable plugs into Optics Port 2. The RM-DS connects to Optics Port 3.
RW Solid State Optics Probe Assembly, Suction Cup, Visible Detector (AW0007)
Don't let enclosures that prevent magnetic or clamp based optics attachments keep you from getting quick test results. WECO offers the Visible Solid State Optics with Suction Cup attachment to make sure you can test meters equipped with visible LEDs. Connects to Optics Port 2.
RW Click Switch Adapter (AW0008)
Sometimes optics just are not an option, and that’s when you turn to WECO’s Click Switch Adapter. Visually observe the disk’s rotation and manually register revolutions with the click of a button. Connects to Optics Port 3.
RB-IR, RW Solid State Optics Probe Assembly, Suction Cup, IR Detector (110165)
Solid State IR Optics Probe Assembly with suction cup attachment to detect the meter's IR emitter.
RB-IR, RW Solid State Optics Probe Assembly, Magnetic, IR Detector (110166)
Solid State IR Optics Probe Assembly with magnetic attachment to detect the meter's IR emitter.
RW Optics Extension Cable, 33 ft (10 meters) (AW0033)
When your standard optics cable just isn’t long enough, reach for WECO’s Optics Extension Cable. This cable adds 33 ft (10 meters) to the allowable distance between your optics sensor for the Optics 2 Input and RW. This cable is used with any of the optics that connect to O
External Current Probe Options:
RW 10 amp .47”[12mm] Jaw Transformer Rated Probe Kit, 5 ft + 25 ft Leads (AW0027)
This small, compact probe with a .47” jaw opening is used to measure currents from 40mA to 10A, 600 V maximum.
RW Current Probe, 100 amp .47”[12mm] Jaw Transformer Rated Probe Kit, 5 ft Leads + 25 ft Extension
(AW0013)
The “clothespin” style current probe is most often used for secondary current measurements from 400mA to 100A, 600V maximum.
RW 1000 amp, 2.25” Clamp On Probe Kit, 25 ft Leads, 600 Volts (AW0014)
The circular clamp-on probe is used for current measurements with a range of 2.0A to 1000A, 600 V maximum for conductors up to 2.25” maximum.
RW 3000 Amp Square Jaw Probe Kit, 25 ft Leads, 600 Volts (AW0028)
This square clamp is great for higher currents, up to 3000A. The square jaw permits multiple conductors or bus bar positioning.
RW AmpFlex® Current Probe Kit , 100/1000 Amps, 1000 Volts, 36 in (AW0010) , 25 Ft Current Probe Extension Cable (AW0018)
The AmpFlex® current probe kit includes a flexible current sensor for measurements on conductors where standard clamp-on probes cannot be used. The 36 inch sensor with electronic module and a calibration adapter can measure up to 1000 amps, 1000 V maximum.
RW AmpFlex® Current Probe Kit, 3000 Amps, 1000 Volts (AW0052 - 24 in), (AW0026 - 36 in), 25 Ft Current Probe Extension Cable (AW0018XX)
The AmpFlex® current probe kit includes a flexible current sensor for measurements on conductors where standard clamp-on probes cannot be used. The sensor with electronic module and a calibration adapter can measure up to 3000 amps, 1000 V maximum.
RW High Voltage Current Probe Kit, 2000 Amps, 150kV (AW0011)
The high voltage current probe kit includes a fiber optic isolated current probe with 3.85˝ wide jaw for current measurements of primary conductors above 600V to 150kV. Use to test CT Ratios. Detachable line hanger, adapter and probe with hot stick mounting capability all come in a convenient carrying case.
RW CT Current Boost, 200 Amps (AW0059)
Use this CT Current Boost module at sites where current is low. For use with through-hole CTs only.
External Voltage Probe Options:
RW 600V Voltage Probe Kit for Low Voltage PT Testing (AW0023)
The 600V PT Probe allows you to check the voltage on systems that are 600 volts and less, allowing you to verify the potential transformer is working correctly.
RW High Voltage Probe Kit, 40kV (AW0012)
This high potential kit is a power quality tool for 10kV to 40kV applications. Determine primary voltage from primary conductors. Use to test PT Ratios. A fiber optic link provides the isolation. Kit comes complete with carrying case, hot stick mounting capability, and adapters.
Probe Options: (Extensions and Adapters)
RW Current Probe Extension Cable,
25 ft (AW0018)
Extend the distance from the RW to the test location by 25 ft with this cable. Connect up to four to increase the overall distance to 100 ft. This option works with all probes listed above.
RW Adapter Kit for Customer Supplied Sensor Link Probe (AW0019)
For customers who already own compatible sensor link voltage or current probes, this low cost adapter kit makes it possible to use with your RW. Note: for reliable accuracies, send your probe to WECO for calibration.
KYZ Cable Options:
RW Form-C KYZ Cable Set, 6.5 ft (3 wire front panel jacks) (AW0009)
All you need is a KYZ cable set to conduct a KYZ test or use the KYZ connection to test the meter. Three plugs connect right to the RW-3X front panel jacks by standard yellow, black, and red cables with alligator clips to the meter.
RW Advanced I/O KYZ Breakout Cable (AW0022 - 8 ft),(AW0025 - 12 ft), (AA0029 - 18 in)
This cable is used to connect KYZ outputs from meters into the RW's Advanced I/O Connector. The connector has two Form A input channels that can be independently configured as four Form C input channels. The Advanced I/O Connector also has two Form A output channels and one Form C output channel.
Additional Current and Voltage Lead Options:
RW Voltage and Current Cable Alternate Termination Assembly Set, Right Angle, Customer End Unterminated (AW0046)
This set includes a RW Potential Cable with right angle, customer unterminated ends and a RW ‘A’, ‘B’, ‘C’ Phase Current Cable with right angle plugs, customer unterminated ends.
RW Voltage and Current Cable Set (AW0048)
Switchboard Meters, 4mm Plugs for Test Paddle Terminations.
RW Voltage and Current Leads Extension Kit,
12 ft (AW0049)
This extension kit increases the distance from the RW to your test switch by 12 ft. It supports up to 600V and 15A per phase. This also includes a 12 ft optics and optics coupler extension.
RW Braided ‘A’, ‘B’, ‘C’ Phase Current Cables with Open CT Saf-T-Plugs, Right Angle Plugs (AW0050)
Right Angle Plugs are highly recommended. The special Saf-T-Plugs have a protection circuit at the test switch connection which will short the CT if an open circuit condition is detected.
Miscellaneous Options:
RW, Barcode Scanner Option (AX0023)
The RW’s onboard software has been built from the ground up to take full advantage of barcode scanning to save you valuable time when meter testing in the field. With just one scan of a barcode you can automatically enter the meter’s faceplate information, load the appropriate test sequence, and recall the last saved results for that particular meter.
TTS-8 Temporary Test Switch for 5S meter (CA000581)
This allows you to remove a socket meter, plug in the adapter with the test switch and then plug the meter into the adapter for 5S meters.
TTS-13 Temporary Test Switch for 6S and 9S meters (CA000579)
This allows you to remove a socket meter, plug in the adapter with the test switch and then plug the meter into the adapter for 6S and 9S meters.
